DTF Transfer Cold Peel Double Side Matte PET Film Roll Dtf Transfer
Film
Printing Process: The DTF PET film is typically used in combination
with DTF ink and hot melt adhesive powder. The design or pattern is
printed onto the PET film using a suitable inkjet printer or other
digital printing methods. The ink is then dried or cured, depending
on the specific ink formulation.
Transfer to Fabric: Once the design is printed and dried on the PET
film, it is placed onto the fabric with the printed side facing
down. Heat and pressure are applied to activate the hot melt
adhesive powder, which bonds the ink to the fabric. The PET film
acts as a carrier, allowing the ink to transfer from the film onto
the fabric during the activation process.
Removal of PET Film: After the activation process, the PET film is
peeled away from the fabric, leaving the transferred ink or design
behind. The ink becomes permanently bonded to the fabric, creating
a durable and vibrant print.
Double Sided Matte PET Film Product Description
Product Specification | Thickness | 0.075mm |
| Length | 100m |
| Size | A4, A3, A3+ |
| Finished Product | 0.075mm*600mm*100m/roll |
Operating Conditions | Press Temperature | 130℃-160℃ |
| Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
Packaging and Storage Conditions:
| Packaging | 1000sheets/2000sheets a ctn |
Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When
opening the package and not using it, please seal it and store it
to prevent moisture and high temperature |
The storage conditions are temperature -5℃-30℃, humidity 40-80%,
avoid direct sunlight, shelf life is one year |
Why did you choose us
1. Professional R & D team, a new enterprise integrating
production, R & D and sales
2. Good service and short delivery time
Applications of DTF PET film
Heat Press Transfer: Place the DTF PET film with the printed side
facing down onto the fabric. Apply heat and pressure using a heat
press machine. The heat activates the adhesive layer on the PET
film, allowing the ink to transfer from the film to the fabric. The
pressure ensures proper adhesion and ink penetration into the
fabric fibers.
Cooling and Peeling: After the transfer process, allow the fabric
to cool down, which helps in setting the ink. Once cooled,
carefully peel off the DTF PET film from the fabric, leaving the
transferred design behind. Take care while peeling to avoid any
damage to the print.
Post-Treatment (Optional): Depending on the ink type and fabric
requirements, additional post-treatment steps may be necessary.
This can include heat curing, washing, or other finishing processes
to enhance the durability and washability of the print.
FAQ
Q1:What is the MOQ?
A4: 2000pcs
A3: 1000pcs
30cm: 4rolls
60cm: 2rolls
Q2:What about the bulk specifications?
The thickness is 0.075mm, length is 100m per roll.
The width has 30cm, 33cm, 60cm.
We also have the A3, A4, A3+ and A4+.
Q3:How long is the lead time and delivery time?
A4:For sample the lead time:1-3days;
For bulk the lead time:5-7days;
For bulk the delivery time:3-7days by air, 25-35 days by sea;
(p.s.:usually depends on the order quantity)
