Heat Transfer Printing TPU DTF Hot Melt Adhesive Powder White DTF
Powder
Outstanding adhesive properties allow for effective bonding to a
variety of substrates, including fabrics, textiles and other
materials commonly used in apparel and textile printing.
Heat activated: The adhesive powder is applied to the printed
pattern on the PET film and when heated during the transfer
process, the powder melts and turns into adhesive. This allows the
pattern to be transferred from the PET film to the target material.
Versatility: DTF TPU hot melt adhesive powder is compatible with
different types of fabrics such as cotton, polyester, nylon and
blends. Its strong adhesion to these materials ensures that the
printed design remains intact even after washing and wearing.
Durability: Once the adhesive powder is activated and bonded to the
fabric, it forms a long-lasting and flexible bond. This ensures
that the transferred design retains its quality, vibrancy and
integrity over time, even after frequent use and washing.
Application process: To use DTF TPU hot melt adhesive powders, a
layer of powder is applied to the printed design on the PET film.
Excess powder is then removed, leaving a thin, even layer of
adhesive on the pattern. The PET film is then pressed against the
target material with heat and pressure to melt the adhesive and
bond the pattern to the fabric.
DTF Powder For DTF Product Description
| Property | Criterion |
| Appearance | White powder |
| Composition | TPU |
| Density | 1.20±0.02 g/cm³ |
| Melt Point | 95-115 ℃ |
| Melt Index | 30±7 g/10min |
| Powder size range | 0-80 μm |
80-200 μm |
150-250 μm |
Powder For DTF Technical Parameters:
| Bonding parameters (for reference only) | Temperature | 110-130℃ |
| Press | 1.5-2.5 kg/cm2 |
| Time | 8-15 S |
| Washing Resistance | 40℃ | Excellent |
| 60℃ | General |
| 90℃ | / |
Packaging and Storage Conditions:
| Packaging | 20KG / bag, packed in PE inner bag+kraft bag |
| Storage Conditions | Stored in dry unopened packaging at room temperature for 12 months.
High temperature and pressure will cause agglomeration. The trays
cannot be double-pressed. |
Application of DTF Powder white powder
Adhesive Properties: DTF thermoplastic polyurethane hot melt
adhesive powders are known for their strong adhesive properties.
When activated by heat, it creates a strong bond between the
printed design and the target material, ensuring a long-lasting
bond.
Compatibility: DTF TPU hot melt adhesive powders are compatible
with a wide range of fabrics and textiles, including cotton,
polyester, nylon and blends. It adheres well to these materials,
providing excellent adhesion and preventing designs from peeling or
fading.
Hot Start: The adhesive powder is applied to the printed design on
the PET film. When heated during the transfer process, the powder
melts and turns into a molten adhesive, effectively bonding the
design to the fabric.
Flexibility and durability: DTF TPU hot melt adhesive powders
create a flexible and durable bond between the design and the
fabric. This ensures that the transferred design remains intact
even after frequent wear and tear, washing and stretching.
Application process: When using DTF TPU hot melt adhesive powders,
a layer of powder is applied to the printed design on the PET film.
The excess powder is then removed, leaving a thin, even layer of
adhesive. The PET film is then placed on the target material,
heated and pressurised to activate the adhesive and bond the design
to the fabric.
Characteristics of hot melt adhesive powder
1.100% ink absorption rate,
2. The powder is clean,
3. The pattern is bright in color,
4. Very soft to the touch.
5. Second on-site delivery.
Why choose us
1. own factory, efficient technical equipment, several production
lines
2. excellent service and short delivery times
3. we are an environmentally friendly adhesive company, to ensure
the environmental performance of raw materials
4. professional R&D team, a new type of enterprise integrating
production, R&D and sales
FAQ
Q1). What is your Particle size?
0-80um, 80-200um , 150um-250um ,200um-400um
Q2). Do you provide free sample? And how many days it will take?
Yes, we can provide 0.3kg free sample, only need you to pay the
shipping cost. We will make the sample within 1- 2working days
and it will take 3-7days on the transportation.
Q3). What is your lead time?
2-7 days , depending on the quantity ,
we almost have safe stock ,
Q4). How do I pay for my order?
We accept T/T , Paypal and alibaba trade assurance order.
