1kg 5kg Tpu Polyurethane White Hot Melt Dtf Powder For T-Shirt Dtf
Printing
Composition: DTF TPU (Thermoplastic Polyurethane) hot melt adhesive
powder is typically made from thermoplastic polyurethane resins.
These resins have excellent adhesion properties when activated by
heat and pressure, allowing the transfer of the design onto the
fabric.
Activation Temperature: DTF TPU hot melt adhesive powder requires a
specific temperature range to activate and bond with the fabric.
The activation temperature varies depending on the specific
adhesive powder and the fabric being used. It is important to
follow the manufacturer's instructions to ensure proper adhesion
and durability of the transferred design.
Application: The DTF TPU hot melt adhesive powder is applied to the
printed design on the DTF film using a specialized powder
applicator or printer. The powder adheres to the ink on the film,
creating a layer of adhesive. This layer serves as the bonding
agent between the design and the fabric during the transfer
process.
Adhesion Strength: DTF TPU hot melt adhesive powder provides strong
adhesion between the design and the fabric. This ensures that the
transferred design remains intact even after repeated washings and
normal wear and tear. The adhesive strength may vary depending on
the specific powder and its application technique.
DTF Powder For DTF Product Description
| Property | Criterion |
| Appearance | White powder |
| Composition | TPU |
| Density | 1.20±0.02 g/cm³ |
| Melt Point | 95-115 ℃ |
| Melt Index | 30±7 g/10min |
| Powder size range | 0-80 μm |
80-200 μm |
150-250 μm |
DTF Powder For DTF Technical Parameters:
| Bonding parameters (for reference only) | Temperature | 110-130℃ |
| Press | 1.5-2.5 kg/cm2 |
| Time | 8-15 S |
| Washing Resistance | 40℃ | Excellent |
| 60℃ | General |
| 90℃ | / |
DTF powder Packaging and Storage Conditions:
| Packaging | 20KG / bag, packed in PE inner bag+kraft bag |
| Storage Conditions | Stored in dry unopened packaging at room temperature for 12 months.
High temperature and pressure will cause agglomeration. The trays
cannot be double-pressed. |
Application of DTF Powder
Prepare the DTF Film and Fabric: Begin by selecting the appropriate
DTF film and fabric for your project. Ensure that both the film and
fabric are clean, free from dust, and properly pre-treated if
necessary. Pre-treatment may involve processes like washing,
drying, or applying a primer to enhance adhesion.
Print the Design on the DTF Film: Use a DTF printer or a compatible
printer with DTF capabilities to print your desired design onto the
DTF film. Ensure that the design is printed with high-quality,
vibrant inks for optimal results.
Apply the DTF TPU Hot Melt Adhesive Powder: After printing the
design, it's time to apply the DTF TPU hot melt adhesive powder.
There are different methods for powder application, including:
Powder Applicator: Use a specialized powder applicator machine
designed for DTF printing. The machine applies a controlled and
even layer of the adhesive powder onto the printed design.
Powder Printer: Some DTF printers have built-in powder application
capabilities. These printers can apply the adhesive powder directly
onto the printed design as part of the printing process.
Manual Sprinkling: Alternatively, the adhesive powder can be
manually sprinkled over the printed design using a fine sieve or
shaker. Ensure even distribution and coverage of the powder.
Shake off Excess Powder: Once the adhesive powder is applied,
gently shake off any excess powder from the DTF film. This helps
remove loose or unadhered powder and ensures a clean transfer onto
the fabric.
Characteristics of hot melt adhesive powder
1.100% ink absorption rate,
2. The powder is clean,
3. The pattern is bright in color,
4. Very soft to the touch.
5. Second on-site delivery.
Why choose us
1. own factory, efficient technical equipment, several production
lines
2. excellent service and short delivery times
3. we are an environmentally friendly adhesive company, to ensure
the environmental performance of raw materials
4. professional R&D team, a new type of enterprise integrating
production, R&D and sales
FAQ
Q1) . How about your conventional package and the MOQ of your
adhesive powder?
We have 1kg,2kg,5kg and 20kg per bag,MOQ is 20kg.
Q2) . What type of hot melt adhesive powder do you have?
We have PA, TPU, EVA and PES hot melt adhesive powder.We can accord
your application to give your suitable type.
Q3). What is your Particle size?
0-80um, 80-200um , 150um-250um ,200um-400um
Q4). Do you provide free sample? And how many days it will take?
Yes, we can provide 0.3kg free sample, only need you to pay the
shipping cost. We will make the sample within 1- 2working days
and it will take 3-7days on the transportation.
