A3 A4 DTF PET Film
A3 A4 30CM 33CM 60CM Width PET Film Roll For DTF Printer
Product model: 1703-1
Description:This product is a thermoplastic film of hot melt adhesive, entrust
PET, can be printer or spray engraving machine, the weak
solvent ink directly Printed on the printing film to form a variety
of beautiful patterns, and then transferred to the hot objects on
top.Suitable for all kinds of textile fabrics, not subject to the
color of the substrate, strong covering power.Besides, it has
strong bonding effect, high color fastness, soft hand feeling,
washable (45-60℃), soft hand feeling, high elasticity and bright
light.
Function: The digital printing DTF
Physical Characteristics:
| Product Specification | Conventional Thickness | 0.075mm |
| Conventional Length | 100m |
| Conventional Width | 300mm 600mm |
| Finished Product | 0.075mm*600mm*100m/roll |
| Operating Conditions | Heat Press Temperature | 130℃-160℃ |
| Heat Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
| Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When
opening the package and not using it, please seal it and store it
to
prevent moisture and high temperature |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%,
avoid direct sunlight, shelf life is one year |
Cautions: 1. Tear-off method: cool tearing is required, hot tearing
is not possible immediately, because the material is still in an
activated state after high-temperature and high-pressure hot
stamping, and the surface may be uneven and gloss may be uneven
after being torn off immediately, which affects the appearance
quality. 2. The printing film is a soft product. A slight
stickiness on the surface is normal, and the surfaces should be
prevented from sticking to each other. 3. Reasonably control the
temperature and pressing time. If the stamping temperature is too
high or the time is too long, it will easily cause discoloration or
decrease in elasticity. 4. Due to the particularity of the product
itself, we suggest not to use corrosive detergents, dry cleaning or
use bleaching agents, it is best to use water below 40 ℃, cold
water is the best, please wash the reverse side. Keep the color for
a long time. 5. The washing time is 12 hours after pressing and
ironing, the effect is better. Note: The seller hereby declares
that Tunsing will refuse to accept the assurance of the components
of the manufacturing process. Tunsing firmly believes that the
information content is reliable. However, the claims for possible
problems will not be guaranteed for the components of a particular
process. Before use, the manufacturer must determine the
suitability of the product for the items to be used. The user must
bear the risks and possible problems in the various manufacturing
stages of testing and use. The Seller and the manufacturer shall
not be liable for any direct injury, loss, damage or misuse.
