0.075mm DTF Printing Film
DTF Printing film 0.075mm Thickness Single Side Matte PET Film
PET printing film is also called color inkjet film, digital
printing film and so on. The water-based colored ink and white ink
are directly printed on the printing film through the printer to
form various beautiful patterns, which are dried by sprinkling hot
melt adhesive powder and then transferred to the ironing object.
This product is a single-sided printing film suitable for all kinds
of textile fabrics. It is easy to peel off. The pattern after
ironing is bright in color, soft to the touch, good elasticity,
washable, rubbing resistance, hand-washed and machine washable,
strong weather resistance, high and low temperature The glue will
not open or break under the environment.
DTF Printing film Physical Characteristics:
Product Specification | Conventional Thickness | 0.075mm, 0.10mm |
| Conventional Length | 100m |
| Conventional Width | 600mm |
| Finished Product | 0.075mm*600mm*100m/roll |
| Operating Conditions | Heat Press Temperature | 130℃-160℃ |
| Heat Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
| Washing Resistance | Washable Temperature | 45℃-60℃ |
| Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When
opening the package and not using it, please seal it and store it
to prevent moisture and high temperature |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%,
avoid direct sunlight, shelf life is one year |
Cautions:
1. Tear-off method: cool tear or hot tear.
2.The printing film is a soft product. A slight stickiness on the
surface is normal, and the surfaces should be prevented from
sticking to each other.
3.Reasonably control the temperature and pressing time. If the
temperature is too high or the time is too long, it will easily
cause discoloration or decrease in elasticity
Note: The seller hereby declares that Tunsing will refuse to accept the
assurance of the components of the manufacturing process. Tunsing
firmly believes that the information content is reliable. However,
the claims for possible problems will not be guaranteed for the
components of a particular process. Before use, the manufacturer
must determine the suitability of the product for the items to be
used. The user must bear the risks and possible problems in the
various manufacturing stages of testing and use. The Seller and the
manufacturer shall not be liable for any direct injury, loss,
damage or misuse.
DTF Printing film
