60Cm Width Cold Peel Heat Printing DTF Transfer PET Film for Clothing

PET Film Description

1. ES1703-1 film peel-off method is cold peel.

2. PET film has single-side matte and single-side printing film.

3. PET film use for all kinds of textile and fabrics.

PET Film Physical Characteristics

Cautions:

1. Tear-off method: cold peel.

2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other.

3. Reasonably control the temperature and pressing time. If the temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticity

DTF PET Transfer Film Application

Customers Feedback

 Our company is currently equipped with two ultra-low temperature freezer pulverizers imported from Germany, with an annual production capacity of 6,000 tons of TPU powder. . Eight sets of ultrasonic high-efficiency powder sieving machines can sieve TPU hot melt adhesive powder with different particle sizes such as 0-80μm/80-200μm/150-250μm/200-400μm/400μm and above. The TPU hot melt adhesive powder produced by the company has a Shore hardness of 55A/65A/75A/85A, etc. And is widely used in heat transfer (DTF, offset heat transfer), clothing, shoe materials, luggage, etc.

MAIN PRODUCTS

TPU hot melt adhesive powder

PES hot melt adhesive powder

PA hot melt adhesive powder

EVA hot melt adhesive powder

Double Side Matte DTF pet film

Singe Side Matte DTF pet film

Application:

It can be used all kind of fabric.

TPU hot melt adhesive powder product data

PES hot melt adhesive powder product data

PA hot melt adhesive powder product data