75 Micron Double Matte PET Film For DTF Digital Transfer Film
Model:ES1703-2
Production Description of PET film for DTF:
- PET heat transfer film is also called color inkjet film, digital
printing film and so on.
- The water-based colored ink and white ink are directly printed on
the printing film through the printer to form various beautiful
patterns, which are dried by sprinkling hot melt adhesive powder
and then transferred to the ironing object.
- This product is a two-sided frosted, one-sided printing film.
- The pattern after ironing is bright in color, soft to the touch,
good elasticity, washable, rubbing resistance, hand-washed and
machine washable, strong weather resistance, high and low
temperature
- The glue will not open or break under the environment.
Specification of PET Film For PET film for DTF:
| Product Specification | Conventional Thickness | 0.075mm |
|
| Conventional Length | 100m |
| Conventional Width | 300mm *330mm* 600mm |
| Finished Product | 0.075mm*600mm*100m/roll |
| Operating Conditions | Heat Press Temperature | 130℃-160℃ |
| Heat Press Time | 10-15 seconds |
| Pressure | 0.3-0.5mpa |
| Washing Resistance | Washable Temperature | 50℃-100℃ |
Application of PET Film For PET film for DTF:
PET heat transfer film is used for all kinds of textile fabrics.
Step of Usage:
1. Printing pattern
2. Powder spray
3. Shake off excess powder
4. Heat and Dry
5. Automatic wing
6. Finish
Advantage of PET film for DTF:
1. Eco-friendly
2. Scratch resistant
3. Non-fading
4. Washable
Customer Feedback of PET Film For Heat Transfer:
Payment Term:
1. We accept various payment methods. Almost every style credit
card, PayPal, bank transfer etc.
2. Please make the payment within three days after place an order.
3. Your payment will be released only after you confirm the
delivery
Package detail:
0.075mm*60cm*100m/roll 1 rolls /ctn
0.075mm*30cm*100m/roll 2rolls/ctn
0.075mm*33cm*100m/roll 2rolls/ctn
A3(297mm*420mm)
A4(297mm*210mm)
Accroding customers' requirement
Note:
1. Tear-off method: cool tear or hot tear.
2. The printing film is a soft product. A slight stickiness on the
surface is normal, and the surfaces should be prevented from
sticking to each other.
3. Reasonably control the temperature and pressing time. If the
temperature is too high or the time is too long, it will easily
cause discoloration or decrease in elasticity
Shippent:
By Air and Express usually.
And we are also according to customer requirements.
Also can use customer's forwarder or account to ship the goods to
you as requested.
Why Choose Us:
1. We are environmentally friendly adhesive enterprises to ensure
the environmental performance of raw materials
2. Own factory, efficient technical equipment, a number of
production lines
3. Professional R & D team, set production, research and
development, sales as one of the new enterprises
4. Service thoughtful, short delivery cycle
