75 Micron 30 33 60 cm 60cm 60cm*100m DTF PET Film Roll For Heat
Transfer
Dtf Pet Film Product Description
DTF Transfer Film offers advantages such as high color accuracy,
sharpness, and the ability to reproduce intricate details. It
enables the transfer of complex designs, gradients, and even
photographs onto different materials with precision and clarity.
This process is commonly used in various applications, including
garment decoration, personalized merchandise, and custom printing.
Printable transfer film typically consists of three layers:
Base Layer: The base layer is a carrier sheet or film that provides
stability and support during the printing and transfer process. It
holds the design or image during printing and acts as a temporary
carrier for transferring the design onto the target surface.
Adhesive Layer: The adhesive layer is a thin coating applied to the
surface of the transfer film. It is designed to adhere to the
target surface when heat and pressure are applied during the
transfer process. The adhesive layer helps to ensure that the
design remains intact and firmly bonded to the substrate.
Release Layer: The release layer is a coating or treatment on the
opposite side of the adhesive layer. It allows for easy release of
the transfer film from the printed design after the transfer
process is complete. The release layer prevents the film from
sticking to the printed design during storage or handling.
Dtf Pet Film Product Specification:
Product
Specification | Conventional Thickness | 0.075mm |
| Conventional Length | 100m |
| Conventional Width | 600mm |
| Finished Product | 0.075mm*600mm*100m/roll |
Washing Resistance | Washable Temperature | 45℃-60℃ |
Storage Conditions & Shelf Life | It is strictly forbidden to collide with sharp objects. When
opening the package and not using it, please seal it and store it
to prevent moisture and high temperature |
| The storage conditions are temperature -5℃-30℃, humidity 40-80%,
avoid direct sunlight, shelf life is one year |
Dtf Pet Film Operating Conditions
Operating Conditions | Heat Press Temperature | 150℃-160℃ |
| Heat Press Time | 8-15 seconds |
| Pressure | 0.3-0.5mpa |
Cautions:
1. Tear-off method: cool tear or hot tear.
2. The printing film is a soft product. A slight stickiness on the
surface is normal, and the surfaces should be prevented from
sticking to each other.
3. Reasonably control the temperature and pressing time. If the
temperature is too high or the time is too long, it will easily
cause discoloration or decrease in elasticity
FAQ
1.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer
material manufacturer ,having more than 10years experience. able to
assist you R&D new products. So if you need bonding some
special materials, please don't hesitate to let us know.
2.How do you transport the products?
If you are not urgent, we usually transport by ship because it is
the cheapest way. But for the West Asia area, we deliver by
train because there is no sea to ship. And for samples and urgent
cargo, we transport it by air as it is the fastest way .Of
course if you have other better idea about transport, we will
accept it.
3. May I have your samples?
If you need some sample for reference, please let us know your
fully address/ship mode with courier ,and we will arrange sample
for your reference.
4. How long is the lead time?
Sample lead time:3-7 days Bulk lead time:7-10 days(depends on order
quantity)
5. How do I pay for my order?
We accept T/T , Paypal
